IMPORTANT NOTE REGARDING FRONT FORK SPRINGS
FOR 2013-EARLIER TOURING MODELS
Currently we are unable to manufacture the 41mm springs for 2013-earlier HD touring models and most softail models due to the lack of availability of raw materials. Therefore we are unfortunately unable to supply them with your system at this time.
In order for the front fork components to be installed without new replacement springs, the factory springs must be cut. See options below:
Option 1. Install using factory springs, cutting approximately in half. Use the end of the spring with the larger gap between coils. Cut the spring and grind smooth, final spring length should be around 9” long. Drop the spring into the fork tube with the factory end down and the cut side up towards the air piston / fork cap.
Option 2. Send your factory springs to us and we will cut them for you and return at no charge. Ship to: DIRTYWORKS - 225 S 65th St, Kansas City KS 66111
Option 3. Request that new 41mm springs be shipped to you once they are available, current estimate is May 2022. Please call 913-228-1978 or email firstname.lastname@example.org and confirm your name and order number, and we can send a pair of new springs as soon as they are available.
If you have any questions about installation with cut factory springs or anything else, call us at 913-228-1978 or email email@example.com