Front Stand-alone basic air ride kit for 49mm telescopic fork models. Will not work on inverted forks. Does not include any specific v-rod frame mounting brackets for the compressor, so some fabrication may be necessary. Factory fork cap bolts will need to be drilled and tapped to allow installation of included push-to-connect air fittings, or you can add caps that are already drilled and tapped for $49.99. System runs 1/4" air line from the compressor to the dump manifold, then splits to (2) 5/32" airlines going to each fork tube for optimum flow and ease of installation.
Shipping Lead Time: Approximately 10 days before shipment