Photos for reference only, stands may vary slightly in appearance
IN STOCK, READY TO SHIP
FREE SHIPPING TO US LOWER 48 STATES
MRI Customs Electric Center Stand - PLEASE READ ENTIRE DESCRIPTION
MRI Customs Electric center stands are designed, manufactured and warrantied by MRI Customs Matt Risley Innovations: https://www.mricustoms.com/contact-us/
*PLEASE NOTE THIS STAND DOES NOT FIT BIKES WITH CROSS-UNDER PIPES THE CROSS-UNDER PIPE WILL NOT ALLOW CLEARANCE FOR THE LEGS TO FOLD UP AND OUT OF THE WAY FOR RIDING*
*WHEN USED WITH AIR SYSTEM INCLUDING A TANK, ALWAYS INSTALL A SAFETY VALVE TO PREVENT THE BIKE FROM LIFTING WHILE UNATTENDED*
*SAFETY VALVE IS INCLUDED WITH EVERY EL GRANDE AND STEALTH SYSTEM, AS WELL AS NEW FAST-UP REAR SYSTEMS*
*NO RETURNS ON CENTER STAND ONCE REMOVED FROM ORIGINAL PACKAGING*
*SOME OVERSIZED FRONT/REAR WHEEL COMBOS CAN REQUIRE LONGER LEGS THAN NORMAL - FOR EXAMPLE, LATE MODEL BIKES WITH 21"OR 23" FRONT WHEEL AND 18" REAR WHEEL MAY NEED 3-HOLE LEGS EVEN WITH FRONT+REAR AIR. SO YOU WOULD NEED THE #1 LEG KIT INSTEAD OF THE 1-3.5 LEG KIT. PLEASE ORDER ACCORDINGLY*
Matt Risley Innovations Electric Center Stands fit Harley Davidson® Touring Bikes from 1990 to present. These stands bolt on in minutes and use a linear actuator to raise and lower the legs electronically. An air ride system must be used to lower the bike/stand to the ground. The two legs provide a very sturdy base, allowing the bike to sit upright while parked.
All MRI Electric Center Stands have been redesigned to make fitment for all customers a breeze. No more measuring is needed! Please select your year and leg kit based on your bike's configuration.
Models of Fitment
A. 2006 and Earlier
B. 2007 and 2008 - Models with Legend Air Ride: The compressor unit will need to be moved from under the bike and relocated
C. 2009 and Later - NOTE: Does NOT work with cross under exhaust.
NOTE: Models with Legends Air Ride: The compressor unit will need to be moved from under the bike and relocated.
Leg Kits (1-3.5 Recommended for DIRTY AIR FRONT+ REAR kits, #1 recommended for REAR AIR or front+rear with oversized wheels)
MRI Customs is now offering 2 different leg kits for proper fitment. Each leg kit contains all the necessary components needed for an easy install, including:
(2 sets*) of 5/16” steel legs, (2) 5/16” steel feet, (8) ¼” shims made of polycarbonate material (aka, bullet-proof glass) on a CNC, a wiring harness, and hardware pack.
For other info and install videos etc.: https://www.mricustoms.com/product-category/electric-center-stand/
Leg Kit #1 |
Most popular leg kit. Adjustable from 2 ¼ - 4 ½”, every 1/3". Recommended for bikes with rear air ride only. Or front+rear with oversized wheels.Includes 2-hole leg set and 3-hole leg set |
Leg Kit 1-3.5 |
Adjustable from 1 - 3 ½”, every 1/3”. Recommended for bikes with both front and rear air ride.Includes 1-hole leg set and 2-hole leg set |